63690

684-3Z Internal Chamfer Gage 63690

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1" Range In case of wear, the gage may be adjusted to read the proper number.


Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Type: Chamfer Gage
  • Range (in): 0 - 1"
  • Dial Reading: For 90 -127 Degree Angles

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1BODY-CHAMFER GAGE23673-01
    2GAGE HEAD #684 0-1"23665-01
    3SPR, .640X.716X2.500 COMPRESSION23684-01
    4HEAD NUT, 1.00023677-01
    5NUT,INDICATOR COLLET23654-01
    6CONTACT POINT, 1/2"06677-01
    7STEM INSERT24661-01
    8INDICATOR06370-01
    9•CASE SUB ASSEMBLY22702-01
    10•SCREW, #4-48 SLOT X .231 LONGPT092841
    11•CAP, CASE STEM09903-01
    12•BEZEL CLAMP, PLASTIC23417-01
    13•SCREW, .140-40 CLAMP X .281 LONGPT111551
    14•RACK, .275 RANGE91300-01
    15•PIN, RACK GUIDE #25PT068481
    16•GUIDE09347-01
    17•SCREW, #1-64 SLOT X .154 LONGPT093482
    18•SPRING, .105X.125X.4688X.010PT066261
    19•SCREW, #1-64 SLOT X .082 LONGPT068391
    20•BRIDGE/PLATE ASSEM.24028-01
    21••BRIDGE SUB ASSEMBLY09400-01
    22•••BRIDGE #2509408-01
    23•••BEARING, JEWEL #25PT094221
    24•••BEARING,JEWELPT094213
    25•••PIN, .094X.30009425-02
    26••PLATE SUB ASSEMBLY09437-01
    27•••PLATE09389-01
    28•••BEARING,JEWELPT094214
    29•••PIN, .093X.11109431-02
    30••HAIRSPR GEAR ASSEM.PT092881
    31••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    32••SCREW, #1-64 SLOT X .148 LONG23449-01
    33••POST, HAIRSPRING09418-01
    34••PINION, HANDPT089731
    35••GEAR, RACK PINION ASSEMBLY11790-01
    36••GEAR, INTERMEDIATE ASSEMBLY11791-01
    37•SCREW, #3-56 SLOT X .556 LONGPT093522
    38•WSHR,.100X.187X.025PT093502
    39•BACK, INDICATOR #25PT261601
    40•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    41•BEZEL/ CRYSTAL ASSEMBLYPT994191
    42••BEZEL IND., PLASTICPT234161
    43••CRYSTAL, #25PT066221
    44•SPR WSHR,1.593X2.020X.006PT06673A1
    45•HAND, #25PT083081
    46•HAND, #25 TELL TALEPT066611
    47•DIAL,STAT 90-127 I D23681-01
    48•DIAL,REVERSE 25-441RPT11040R1
    49CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

Downloads

    Catalog 33 - Section 5 - Dial and Electronic Indicators and Gages

    We offer a variety of each of the major classes: mechanical dial, electronic display, lever style test and back plunger. Indicator requirements are very specific and Starrett offers everything you need: a broad line of each indicator type, an extensive range of accessories to configure and position the gage, and as needed, an indicator-based, custom engineered solution.

    Precision Hand Tools (Catalog 33)

    612 page catalog featuring precision hand tool, force measurement, vison systems, optical comparators, laser measurement, and flat stock.