/ Precision Measuring Tools / Precision Hand Tools / Hole Gages / Telescoping Gages / 579E * Not actual product image 52614 579E Telescoping Gage 52614 Other similar products The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly rocked in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. 2 1/8- 3 1/2" (54-89mm) Range, 2 3/8" (60mm) Handle. Features Specifications Parts Contact Starrett Features Precision Ground Radius on each gage provides two-point contact for maximum accuracy Greater range Constant spring tension gives uniform contact pressure Both plungers are easily locked at any desired setting Handles can be individually ordered. Handles longer than 12" (300mm) are available on special order. Handles are rigidly attached to the contact plungers and are automatically self-centering Ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter Two telescoping contacts Specifications Range (in): 2-1/8 – 3-1/2" Range (mm): 54-89mm Handle Length (in): 2-3/8" Handle Length (mm): 60mm Parts Member of Kit Item #DescriptionPart No.QtyInformation 10BODY #579D-E08794-01 20PIN, LOCK08795-01 30HOUSING, BEAM13188-01 40BEAM #579E13189-01 50SPRING, .092X.120X3.750X.014X97.503458-01 60GUIDE, SPRING09210-01 70BOLT, LOCK #579D08797-01 80BEAM EXT,2 1/8-3 1/213190-01 90SPR, .093X.140X.18808796-01