01123

796.1MXRL-100 Electronic Micrometer without Output - Metric Only 01123

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.


Contact Starrett

Features

  • IP67 protection against coolants, water, chips, dust and dirt often found in machine shop environments
  • Balanced frame for comfortable and accurate measuring
  • Large, easy-to-read, high-contrast LCD digital readout
  • Starrett No-glare satin chrome finish on thimble and sleeve minimizes annoying surface glare under bright lights indoors or filters out UV light
  • No-glare black wrinkle finish on frame
  • Hard and stable one-piece thimble with rachet lock permits one-hand operation of micrometer and uniform contact pressure
  • Inch/millimeter metric conversion provides simple, universal, standardized unit of measurement at any position
  • Ring-type knurled lock nut for quick and sure locking
  • Micro-lapped carbide measuring faces

Specifications

  • Micrometer Type: Outside
  • Range (mm): 75-100mm
  • Resolution (mm): 0.001mm
  • Anvil/Spindle Material: Carbide
  • Anvil Type: Flat
  • Spindle Type: Flat
  • Lock Nut Type: Lever
  • Thimble Type: Ratchet
  • Thimble Graduations: Metric
  • Display Type: LCD
  • SPC Output: Yes
  • Accuracy (in): +/-.0001"
  • Accuracy (mm): +/-.003mm

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1IP67 MICROMETER FRAME 4", (NON-OUTPUT)NOT AVAILABLE1
    2INSULATOR, FRONT06235-01
    3INSULATOR, REAR (4 IN. / 100MM)06397-01
    4NUT, .375-52 IP67 MICROMETER06414-01
    5U-CUP COLLAR GASKET-IP67 MICROMETER06418-01
    6BEZEL ASSEMBLY, METRIC (NON-OUTPUT) - 796.1 MICROMETER63639-01
    7O-RING, METRIC 10MM ID X 1MM THICK06405-02
    8METRIC STEM, IP67 MICROMETER06172-01
    9U CUP COLLAR, IP67 MICROMETER06497-01
    10ANVIL, CARBIDE TIP19110-01
    11SPINDLE-IP67 MIC-25mm06442-01
    12SHELL, ADJUSTING-METRIC-IP67 MICROMETER06417-01
    13RATCHET ASSEMBLY01431-01
    14•BODY, RATCHET #23019773-01
    15•PIN, RATCHET .066D X .156LPT189761
    16•SPRING, .035 X .061 X.188 X.012 X 601429-01
    17•SCREW, #2-64 SLOT X .204 LONGPT197721
    18•CAP ASSEMBLYPT994451
    19••RATCHET13196-01
    20••CAP, RATCHET07671-B1
    21SHELL, METRIC23610-01
    22SPRING/WASHER COMBINATION, PLASTIC28289-01
    23ROTOR MOUNT ASSEM26286-01
    24SCREW, #5-40 SET X .125 LONG17899-01
    25SCREW, #5-40 SET X .168 LONG23890-01
    26STATOR MOUNT ASSEMBLY, 795/796 MICROMETER63573-01
    27FLEX CABLE, 795.1/796.1 MICROMETER63541-01
    28O-RING, METRIC 4MM ID X 1MM THICK06408-01
    29SPINDLE LOCK62687-01
    30BATTERY RETAINER, 795/796 MICROMETER63529-01
    31TEFLON BUSHING IP67 MICROMETER (NEW STYLE)06173-01
    32BATTERY, CR2032 (SET MOF 2)PT994921
    33SCREW, M3 X .05 X 6MM BHCS - BLACK06415-01
    34SPRING, BARREL06419-01
    35BATTERY CAP, IP67 MICROMETER06174-01
    36SCREW, LOCK IP67 MIC.06410-01
    37SCREW, #2 X 5/16" LG. PHILLIPS FLAT HEAD SELF TAPPING06407-02
    38SCREW, SLOTTED CHEESE HEAD M1.6 x .35mm x 12mm LONG62692-02
    39SCREW, SLOTTED CHEESE HEAD M1.4 x .3mm x 6mm LONG62693-02
    40NEGATIVE BATTERY CONTACT62679-01
    41POSITIVE BATTERY CONTACT62678-01
    42SCREW, SLOTTED CHEESE HEAD M1.6 x .35mm x 4mm LONG62691-03
    43O-RING 1" ID X 1/16" THICK #AS-568A-02206406-01
    44WRENCH #216PT188951
    45STANDARD W/INSULATOR234MA-751
    46CAT. 795/796 (4") - PLASTIC CASE07530-01NOT SHOWN

Downloads


    2D Dimensional Drawing (PDF)

    .pdf

     


    58.54 kb