/  Precision Measuring Tools  /  Precision Hand Tools  /  

Micrometers

  /  

Outside Micrometers

 /

430XLZ-1

72533

430XLZ-1 Indicating Micrometer 72533

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.

Features
Specifications
Accessories
Parts
Downloads
Contact Starrett

Features

  • Dial indicator for Go/No-Go (GO/NG) tolerance inspection in inch units
  • The dial indicator gage is graduated to 0.00005"
  • The anvil retracts for quick workpiece insertion or release.
  • 5-10N (500-1000gf)
  • Balanced frame and thimble design to ensure easy handling and better readability
  • Insulated frame for prevention of temperature related expansion and contraction
  • Provides quick and easy adjustment
  • Reading in ten-thousandths of an inch (.0001") with a vernier scale on the sleeve
  • No-glare satin chrome finish which resists rust
  • Flat measuring faces
  • Advanced sleeve design with staggered lines and distinct figures for precise and easy readability

Specifications

  • Micrometer Type: Indicating Micrometer
  • Range (in): 0-1"
  • Graduations (in): .0001"
  • Anvil/Spindle Material: Carbide
  • Anvil Type: Flat
  • Spindle Type: Flat
  • Thimble Type: Solid
  • Case Type: Wood
  • Accuracy (in): +/-.00004"

Accessories

  • 3206 (68917)
    3206 Outside Micrometer Stand

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1INDICATING MICROMETER FRAME05887-01
    2SHELL, OUTSIDE04390-01
    3SHELL, ADJUSTING16417-01
    4SPINDLE04391-01
    5STEM SUB ASSEMBLY16397-01
    6NUT, .500-52PT168451
    7SCREW, .157-40 SLOT X .377 LONGPT051361
    8SPRING, BARREL10058-01
    9LOCK NUT COMPLETEPT992561
    10•PIN,.085DX.125DX.160L16403-01
    11•RING, BINDING16402-01
    12•SPRING, .089X.107X.062X.009X213207-01
    13ANVIL, MOVABLE04392-01
    14ANVIL BLANK16465-01
    15SCREW, #5-40 SET X .168 LONG23890-01
    16CONTACT ARM04393-01
    17END CAP04394-01
    18PIVOT BUSHING04398-01
    19RETRACTOR ARM04399-01
    20RETRACTOR LINKAGE04400-01
    21PIVOT BUSHING(T. LEVER)04401-01
    22TRANSFER LEVER04402-01
    23TRANSFER ROD04403-01
    24BUSHING, LOWER STEM01755-01
    25CONTACT POINT,3/8 #5PT06632-51
    26CONTACT POINT, 1/4"PT072151
    27SPINDLE BELLOWS, 1/2" INDICATOR63462-01
    28SPRING, .196X.238X1.00X.021X1013405-01
    29SPRING, .166X.200X.750X.017X1109595-01
    30SCREW, #2-56 SHCS X .250 LONG22412-01
    31SCREW, #4-40 BHCS X .250 LONG30117-01
    32RET. RING, 114X.282PT168281
    33WSHR,.157X.218X.078PT093591
    34SCREW, #4-40 BHCS X .500 LONG05904-01
    35ADJUSTING SCREW, JEWEL TIPPED04404-01
    36WASHER, FLAT #463355-02
    37BRIDGE/PARTIAL, SUB-ASSEMBLY (CAT. 430)07754-01
    38•BRIDGE/PLATE ASSEMBLY, CAT. 43001690-01
    39•BRIDGE PLATE04395-01
    40•SCREW, #1-64 SLOT X .128 LONGPT070612
    41•STANDOFF, BRIDGE04397-03
    42•BUSHING, CAT. 43004405-01
    43•SCREW, #2-56 SHCS X .250 LONG22412-0(2)3
    44•SPR WSHR,1.593X2.020X.01506662-01
    45•DIAL, INDICATOR11914-01
    46•HAND, INDICATOR04396-01
    47•BEZEL/CRYSTAL WITH TOL. HANDS SUB-ASSY (CAT. 25)09124-P1
    48••NUT, #1-64 STUD06998-01
    49••BEZEL IND., PLASTICPT234161
    50••CRYSTAL, #25 TOL HD11211-01
    51••COLLAR, BUSHING06992-01
    52••SPRING, .137X.161X.188X.012X 306996-01
    53••SPRING, .106X.130X.188X.012X 306999-01
    54••BUSHING #2524414-01
    55••TOLERANCE HAND ASSEM06994-A1
    56••TOLERANCE HAND ASSEM06994-B1
    57••NUT,.127-60 TOL HAND06995-01
    58CONTACT POINT,1/2 #3PT06632-31
    59INSULATOR, FRONT - FOR INDICATING MICROMETER01625-01
    60INSULATOR, REAR - FOR INDICATING MICROMETER01626-01
    61SCREW, INSULATOR - #2 X 3/8, PHILIPS FLAT HEAD - PLASTITE06372-02
    62SCREW, #2-56 SLOT X .160 LONG24590-04
    63PLUG, EXPANSION13879-01
    64WRENCH #232 1/2PT171841
    65CASE ONLY, WOOD430ZZ1NOT SHOWN

Downloads


    2D Dimensional Drawing (PDF)
    .pdf

     

    207.68 kb
    430 Indicating Micrometer (Bulletin 2103)

    Datasheet with basic overview of product, features, and specifications.

    Catalog 33 - Section 1 - Micrometers

    In the hands of a skilled operator, the precision micrometer is the most accurate hand-held tool available. When close measurements are necessary, the micrometer is the ideal tool for the job because measurement and reading are on the same axis and the anvil end is supported by a strong frame.

    Precision Hand Tools (Catalog 33)

    612 page catalog featuring precision hand tool, force measurement, vison systems, optical comparators, laser measurement, and flat stock.